315MHz RF Transmitter Receiver Module
The RF Transmitter Receiver Module 315MHz Wireless Link Kit is designed for use with Arduino. This wireless transmitter and receiver pair operates at 315MHz and is breadboard-friendly, making it perfect for establishing a simple wireless data link with microcontrollers. Since these modules are transmitters only, you’ll need two different frequency pairs to create a bidirectional communication system.
This Radio Transmitter & Receiver duo is well-suited for controlling devices wirelessly from distances of up to 500 feet. Simply connect the transmitter to your Arduino, Raspberry Pi, or any microcontroller, and connect the receiver to the device you want to control.
Both units are tuned to the same radio frequency, ensuring that when the transmitter sends a signal, the receiver picks it up without the need for wires. This feature makes it easy to achieve straightforward wireless control, and it is compatible with Arduino and Raspberry Pi models 2, B, B+, and A+.
Features
Receiver Module Parameters
- Product Model: XY-MK-5V.
- Operating voltage: DC5V.
- Quiescent Current: 4mA.
- Receiving frequency: 315MHz.
- Receiver sensitivity: -105 dB.
- Size: 30 x 14 x 7 mm.
Transmitter Module Parameters
- Launch Distance: 20-200 meters (different voltage, different results).
- Operating voltage: 3.5-12V.
- Dimensions: 19 x 19 mm.
- Operating mode: AM.
- Transfer rate: 4KB/S.
- Transmitting power: 10mW.
- Transmitting frequency: 315Mhz.
- An external antenna: 25cm ordinary multi-core or single-core line.
- Pinout from left a+ right: (DATA; VCC; GND).
Package Includes
1 x 315MHz RF Transmitter Receiver Module
315MHz RF Transmitter Receiver Module Overview
The 315MHz RF Transmitter Receiver Module is a compact wireless link kit designed for Arduino, Raspberry Pi and other 5V microcontroller platforms. Operating at 315MHz with a sensitivity of –105 dB, it enables one-way digital data transmission over distances from 20 m up to 200 m in open environments.
Key Features of 315MHz RF Transmitter Receiver Module
- Operating voltage: 5V with low quiescent current of 4 mA
- Receiver sensitivity: –105 dB for reliable signal detection
- Communication range: 20 m to 200 m depending on line-of-sight
- Breadboard-friendly pin layout for rapid prototyping
- Direct TTL interface compatible with Arduino, Raspberry Pi, ESP boards
- Genuine module, fast shipping across India from Zbotic
Applications and Use Cases
- Remote control of relays, lights or motors
- Wireless transmission of sensor readings (temperature, humidity)
- Home security triggers for alarms and door/window sensors
- Garage door or gate opener RF link
- Wireless weather station data uplink
- Simple robot or drone telemetry
How to Use 315MHz RF Transmitter Receiver Module
Wire the transmitter’s Vcc to 5V and GND to ground on your microcontroller, then connect its Data pin to a digital output. On the receiver side, connect Vcc and GND similarly, and route its Data output to a digital input on your board. Upload a basic sketch that toggles the transmitter data line and reads the receiver data pin to verify communication. Mount the modules on a breadboard or perfboard for stable connections.
